Clariant Oil Services Outperforms Incumbent and Enhances Production by More Than 200%

Benefits

• More efficient chemistries available from Clariant Oil Services than the incumbent supplier
• Enhanced production by more than 200% through careful batch treatment design and application
• Optimized chemical delivery strategy with close attention to detail and service-driven approach 

Background

A gas well in Northern Alberta had been treated for deliquification for at least two years prior to the operator inviting Clariant Oil Services on the lease to evaluate the current well enhancement program. No continuous injection treatment equipment was present in the well, and the operator was not able to install this equipment due to CAPEX constraints. Therefore, the well was being batch treated with some success; enhanced to produce just under 5 e3m3 (177.5 Mscfd).

Clariant Oil Services Solutions and Value Delivered

Clariant Oil Services was able to boost production the previous spring to approximately 10 e3m3 (354.9 Mscfd), almost doubling the incumbent supplier’s enhanced rate; however, additional issues made it unclear to the operator if the increase was solely due to the program implemented by Clariant Oil Services.

As a result, the well was left as-is for several months until Clariant Oil Services was invited back into the lease to perform a re-evaluation of the well. A batch treatment of 20 litres of WellBoost™ 131, a high activity foaming product combined with aromatic solvents, was applied down the well casing during normal production. Immediately the production rate grew to 10 e3m3 (354.9 Mscfd) and climbed to 14 e3m3 (496.9 Mscfd) after a short time. The operator immediately changed the well’s treatment program to WellBoost 131, and Clariant Oil Services has been successfully treating this well ever since.

Clariant Oil Services’ drive for improvement and meticulous service provision delivered great value to the operator of this well, as well as enhanced production over that of the incumbent chemical supplier by more than 200%.

This information corresponds to the present state of our knowledge and is intended as a general description of our products and their possible applications. Clariant makes no warranties, express or implied, as to the information’s accuracy, adequacy, sufficiency or freedom from defect and assumes no liability in connection with any use of this information. Any user of this product is responsible for determining the suitability of Clariant's products for its particular application.*Nothing included in this information waives any of Clariant’s General Terms and Conditions of Sale, which control unless it agrees otherwise in writing. Any existing intellectual/industrial property rights must be observed. Due to possible changes in our products and applicable national and international regulations and laws, the status of our products could change. Material Safety Data Sheets providing safety precautions, that should be observed when handling or storing Clariant products, are available upon request and are provided in compliance with applicable law. You should obtain and review the applicable Material Safety Data Sheet information before handling any of these products. For additional information, please contact Clariant.

*For sales to customers located within the United States and Canada the following applies in addition: NO EXPRESS OR IMPLIED WARRANTY IS MADE OF THE MERCHANTABILITY, SUITABILITY, FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE OF ANY PRODUCT OR SERVICE. Copyright © Clariant International Ltd, 2013.

™ Trademark application filed in many countries by Clariant

* Previously sold as SOLVTREAT™ 8558